In Stock

Jesmonite Liquid AC300

If for whatever reason you run out of your Jesmonite AC300 liquid quicker than you run out of your base, don’t worry! You can still purchase the liquid component of your Jesmonite AC300 kit, without having to buy the full kit again. 

Jesmonite AC300 is a water-based material used to make decorative moulded objects. It has a lower resin content than AC100 for cost sensitive applications where our AC100 may be over specified. It can be cast and laminated using our unique Quadaxial Glass.

With the option to purchase 400g, 1kg, 5kg, 10kg and 20kg, you can top up however much you need to keep creating your beautiful masterpieces!

£7.50 - £150.00

Next Day Delivery*

We endeavour to dispatch all order within 24 hours, but please allow 3-5 working days for delivery (due to current global supply chain issues).

Shipping Information

Our shipping costs are worked out by the gross weight of your order delivered to your address. NB: We do not currently ship internationally (UK only).

Jesmonite AC300 liquid is easy to use, adaptable material for all moulding applications.
Suitable for decorative cast objects, mould cases, wall panels.
Supplied with a range of ancillary products including glass reinforcements, pigments, fillers, and control chemicals to adapt the material to the widest range of applications.
The ultimate chameleon material can replicate virtually any surface, colour, or texture.

For more information on Jesmonite AC300 liquid and the full kits available, visit our AC300 product page *here*.

We could talk about Jesmonite all day, but it’s important to note that the above information is based on a mixture of both our experience and Jesmonite’s official guidelines. We can’t guarantee that every piece you make will be perfect, but that’s the beauty of experimentation. If you have any questions about Jesmonite and its suitability for you, please don’t hesitate to get in touch.

Jesmonite® AC300 is a low cost alternative to AC100. It is designed for applications where ultimate performance
of AC100 is not required. It is supplied as two components; a water-based acrylic liquid, and a mineral base.
AC300 contains less acrylic resin than AC100 and as such is an economic alternative where external durability is
not required. The system is suitable for a wide range of casting and laminating applications including decorative
cast objects, rubber mould support cases, polystyrene and foam coating, rigid moulds and many other areas
in the world of moulding. A range of ancillary products is also supplied further extending the materials versatility.
Jesmonite AC300 is designed for internal use only, however it is suitable for short-term external projects such as
exhibitions and props. If used externally a sealer or suitable paint system is recommended to protect surface
appearance.
Project specific advice can be obtained by calling our technical department on +44 (0)1588 630302.

PREPARATION

It is essential to use both accurate scales and a Jesmonite High-shear Mixing Blade to ensure that the
compound performs within its specification. Failure to follow these instructions can lead to strength loss, slow
cure, and reduced durability. Workshop conditions should be warm, dry, and out of direct sunlight. Environments
where solvent-based compounds are in regular use should be avoided. Mixing containers should be clean and
dry, and of a suitable size.

MIX RATIOS

The standard mix ratio for AC300 is as follows:
AC300 Liquids 1 part by weight
Jesmonite Base 2.5 parts by weight

Jesmonite® is a Registered Trademark

For technical data check out our Knowledge Hub.

For more information see: Jesmonite.com